- 结构图
- 技术资料
- 安装指导
- 证书
- 测试报告
Technical Data (Loose lay LVT)
| 1 | Dimensions | Length | ISO24342/ASTM F2055 | ± 0.50 mm | |
| Width | ± 0.20 mm | ||||
| 2 | Overall Thickness | ISO24346 /ASTM F386 | Average + 0.13 /-0.1mm | ||
| 3 | Squareness | Length | ISO24342/ASTM F2055 | ≤ 0.15 mm | |
| Width | ≤ 0.10 mm | ||||
| 4 | Dimensional Stability (6h - 80℃) | ISO23999/ASTM F2199 | ≤ 0.15 % | ||
| 5 | Curl (6h - 82℃) | ISO23999/ASTM F2199 | ± 2.0 mm | ||
| 6 | Flexibility | ISO24344/ASTM F137 | Through the 1 inches diameter mandrel, the floor specimen has no crack or break. | ||
| 7 | Colour Fasteness | ISO 105 B02/ASTM F1515 | ≥ 6/Δ E≤8 | ||
| 8 | Abrasion Resistance | EN660-2 | Pass | ||
| 9 | Wear Layer Abrasion Resistance | EN 13329 (S-42, 200 cycle change) | IP≥4000cycles(0.55mm wear layer)， IP≥1800cycles(0.30mm wear layer) | ||
| 10 | Castor Resistance | ISO4918 | No visible damage after 25000 revolutions | ||
| 11 | Height Difference | ISO10582/EN13329 | Average ≤ 0.10 mm， Individual values ≤ 0.15 mm | ||
| 12 | Gloss Retention | EN 16094A | Rating 1 | ||
| 13 | Micro-scratch Resistance | EN 16094B | ≥ Rating 2 | ||
| 14 | Resistance to Chemicals | ISO26987 / ASTM F925 | Class 0 / Excellent | ||
| 15 | Sound Absorbtion | DIN 52210 | ﹤4dB | ||
| 16 | Impact Insulation Class | ASTM E492 | IIC47 | ||
| 17 | Sound Transmission Class | ASTM E90 | STC50 | ||
| 18 | Burning Behaviour | EN 13501-1 | Bfl – s1 | ||
| 19 | Slip Resistance | EN 13893 | DS | ||
| 20 | Static Coefficient of Friction | ASTM D2047 | Dry: 0.37 / Wet 1 : 0.69 | ||
| 21 | Thermal Conductivity | EN 12667 | 0.1167 W/(m·K) | ||
| 22 | Thermal Resistance | EN 12667 | 0.0364 (m 2 ·K) /W | ||
| 23 | Suitable for Underfloor Heating | Yes | |||
| 28 °C MAX | |||||
| 24 | Toxicity | EN 71 | Non Toxic | ||
| 25 | VOC Emission | AgBB/DIBt | Certified | ||
| 26 | Electrical Resistance | EN 1081 | Horizontal:>1,0x1016 OHM Vertical: 5,1 x1012 OHM | ||
| 27 | Formaldehyde emission | EN 717-1 | E1 | ||
| 28 | Antistatic Performance | EN 1815 | PVC SOLE: + 3,5 KV | ||
| 29 | Phthalate | CPSC-CH-C1001-09.3 | DBP,DEHP,BBP,DINP, DNOP, DIDP,DIBP,DnHP,DCHP≤0.1% | ||
| 30 | Heavy Metals | ASTM F963 CPSC-CH-E1002-08.3 | Total Lead (Pb) | ≤100PPm | |
| SOL. Lead (Pb) | ≤90PPm | ||||
| SOL. Mercury (Hg) | ≤60PPm | ||||
| SOL. Chromium (Cr) | ≤60PPm | ||||
| SOL. Arsenic (As) | ≤25PPm | ||||
| SOL. Antimony (Sb) | ≤60PPm | ||||
| SOL. Barium (Ba) | ≤1000PPm | ||||
| SOL. Selenium (Se) | ≤500PPm | ||||
| SOL. Cadmium (Cd) | ≤75PPm | ||||
-
11
2018-10
· LooseLay Installation Instruction
2018-10-11Acclimatisation of Material At least 48 hours prior to installation, LooseLay must be removed from packaging (product may be stacked, but must be rested flat) and allowed to acclimatize in the room where the installation is to take place. Room temperature should be kept between 18°C - 29°C (65°F - 8…
-
ISO14001证书
-
ISO14001英文证书
-
ISO9001证书
-
ISO9001英文证书
-
美国Floorscore认证
-
loose lay - Test Report …