- 结构图
- 技术资料
- 安装指导
- 证书
- 测试报告
Technical Data (Click LVT)
| 1 | Dimensions | Length | ISO24342/ASTM F2055 | ± 0.50 mm | |
| Width | ± 0.20 mm | ||||
| 2 | Overall Thickness | ISO24346 /ASTM F386 | Average + 0.13 /-0.1mm | ||
| 3 | Squareness | Length | ISO24342/ASTM F2055 | ≤ 0.35 mm | |
| Width | ≤ 0.25 mm | ||||
| 4 | Dimensional Stability (6h - 80℃) | ISO23999/ASTM F2199 | ≤ 0.15 % | ||
| 5 | Curl (6h - 80℃) | ISO23999/ASTM F2199 | ± 2.0 mm | ||
| 6 | Flexibility | ISO24344/ASTM F137 | Through the 4 inches diameter mandrel, the floor specimen has no crack or break. | ||
| 7 | Colour Fasteness | ISO 105 B02/ASTM F1515 | ≥ 6/Δ E≤8 | ||
| 8 | Abrasion Resistance | EN660-2 | Pass | ||
| 9 | Wear Layer Abrasion Resistance | EN 13329 (S-42, 200 cycle change) | IP≥4000cycles(0.55mm wear layer)， IP≥1800cycles(0.30mm wear layer) | ||
| 10 | Castor Resistance | ISO4918 | No visible damage after 25000 revolutions | ||
| 11 | Opening Between Elements | ISO10582/EN13329 | Average ≤ 0.10 mm， Individual values ≤0.15 mm | ||
| 12 | Height Difference | ISO10582/EN13329 | Average ≤ 0.10 mm， Individual values ≤0.15 mm | ||
| 13 | Gloss Retention | EN 16094A | Rating 1 | ||
| 14 | Micro-scratch Resistance | EN 16094B | ≥ Rating 2 | ||
| 15 | Resistance to Chemicals | ISO26987 / ASTM F925 | Class 0 / Excellent | ||
| 16 | Sound Absorbtion | DIN 52210 | ﹤4dB | ||
| 17 | Impact Insulation Class | ASTM E492 | IIC47 | ||
| 18 | Sound Transmission Class | ASTM E90 | STC50 | ||
| 19 | Burning Behaviour | EN 13501-1 | Bfl – s1 | ||
| 20 | Slip Resistance | EN 13893 | DS | ||
| 21 | Static Coefficient of Friction | ASTM D2047 | Dry: 0.37 / Wet 1 : 0.69 | ||
| 22 | Thermal Conductivity | EN 12667 | 0.1167 W/(m·K) | ||
| 23 | Thermal Resistance | EN 12667 | 0.0364 (m 2 ·K) /W | ||
| 24 | Residual Indentation | ISO24343-1 /ASTM F1914 | ≤ 0.10 mm/average less than 8 %, maximum single reading 10 % | ||
| 25 | Suitable for Underfloor Heating | Yes | |||
| 28 °C MAX | |||||
| 26 | Toxicity | EN 71 | Non Toxic | ||
| 27 | VOC Emission | AgBB/DIBt | Certified | ||
| 28 | Electrical Resistance | EN 1081 | Horizontal:>1,0x1016 OHM Vertical: 5,1 x1012 OHM | ||
| 29 | Formaldehyde emission | EN 717-1 | E1 | ||
| 30 | Antistatic Performance | EN 1815 | PVC SOLE: + 3,5 KV | ||
| 31 | Phthalate | CPSC-CH-C1001-09.3 | DBP,DEHP,BBP,DINP, DNOP, DIDP,DIBP,DnHP,DCHP≤0.1% | ||
| 32 | Heavy Metals | ASTM F963 CPSC-CH-E1002-08.3 | Total Lead (Pb) | ≤100PPm | |
| SOL. Lead (Pb) | ≤90PPm | ||||
| SOL. Mercury (Hg) | ≤60PPm | ||||
| SOL. Chromium (Cr) | ≤60PPm | ||||
| SOL. Arsenic (As) | ≤25PPm | ||||
| SOL. Antimony (Sb) | ≤60PPm | ||||
| SOL. Barium (Ba) | ≤1000PPm | ||||
| SOL. Selenium (Se) | ≤500PPm | ||||
| SOL. Cadmium (Cd) | ≤75PPm | ||||
-
12
2018-10
· Valinge 2G+5G Click LVT-WPC-SPC Installation instruction
2018-10-12Välinge DRAFT – Not for distribution – The seller of the flooring product is responsible for the installation instructions. General and Installation Instructions 2G + 5G with Bristle tongue, i.e 5G-C or 5G Original -
12
2018-10
· Valinge 2G Click LVT-WPC-SPC Installation Instruction
2018-10-12Special Installation - Horizontal Cut off the locking element with a chisel,put white glue(PVAc) on the adjusted strip and push the planks horizontally together.If necessary place some spacers between last board and the wall during the hardening time of the glue.This method can also be applied to th…
-
ISO14001证书
-
ISO14001英文证书
-
ISO9001证书
-
ISO9001英文证书
-
美国Floorscore认证
-
ASTM E648-14c Test Repor…
-
ASTMF1700 Test Report
-
Click Vinyl Flooring ISO…
-
Electrostatic behavioran…
-
LVT click 3.2mm STC 50
-
LVT click 3.2mm IIC 47
-
Static Coefficient of Fr…
-
Test Report
-
Thermal Conductivity Tes…
-
Water absorption for 4.0…
-
Water absorption for 5.0…